Sanyo DP46848 - Page 7

— 7 —
MAIN BOARD, POWER UNIT AND STAND REMOVAL
Power Unit
A
A
A
A
A
A
A
A
A
A
Power Shield
Main Unit
A
C
C
C
C
1: Stand Removal
Position TV face down on a padded or cushioned surface to protect the screen.
Remove 4 screws (C:6X16) and remove the stand.
2: Main Board Removal
Remove 5 screws (A:3X14) to take the main board off.
3: Power Unit Removal
1.1 Remove 5 screws (A:3X14) to take the power shield off.
1.2 Remove 1 screw (A:3X14) to take the power unit off.