Sanyo DP50741 - V-Chip Parental Control; Adjusting V-Chip Ratings; Clock Timer Settings

– 6 –
BACK CABINET REMOVAL
Remove 59 screws to take the back cabinet off.
(A:4x10, 31 pcs.; C:4x8, 28 pcs.)
MECHANICAL DISASSEMBLY
CAUTION:
This PDP TV uses several different kinds of screws. Using the correct screw is necessary to prevent damage.
Lead wires must be redressed to their previous locations after servicing. The Earth sheet and gasket are
provided to prevent interference to other radio and television receivers. The Earth sheet and gasket should
be returned to its previous position after servicing.
STAND REMOVAL
Position TV face down on a padded or cushioned surface to protect the screen and finish.
Remove 4 screws (B:6X16) and lift up TV from the stand.
B
A
A
A
A
C
C
C
C
A
C
positioning point
positioning point