Sanyo DP50747 - HDTV BACK PANEL (Continued); Component Video Input (VIDEO2 or VIDEO3); S-Video Input (VIDEO1)

12
HDTV BACK PANEL (Continued)
Service Port—For production use only.
AC IN 120V—Connect power cord
here.
See PAGE 16.
S-Video Input (VIDEO1)—To enhance video
detail use the S-Video jack instead of the Video
jack, if available on your external equipment.
(S-Video connection will override a connection
to the Video input jack [VIDEO1]).
See PAGES
23 and 25 for S-Video connection.
Component Video Input (VIDEO2 or
VIDEO3)—Connect digital video equipment
to the Y (green), Pb (blue), Pr (red) and Audio
L/R jacks. These jacks will automatically
detect the type of signal being received.
See
PAGES 20, 21, and 22 for Component jack
connections.