EasyManua.ls Logo

Sanyo DP50747 - HDTV BACK PANEL; HDMI INPUT1;2;3; Digital Audio Output; Audio;Video Input (VIDEO1)

Sanyo DP50747
52 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
11
HDTV BACK PANEL
(CONTINUED ON NEXT PAGE.)
Analog / Digital Antenna Input—Connect
an RF antenna or Analog Cable system to this
jack.
See PAGE 15 for Signal connections.
Analog Audio Out (L/R) Jacks—Connect
external audio equipment here.
See PAGE
27 for Audio Out jack connections.
HDMI INPUT1/2/3 (High-Definition
Multi-media Interface), PAGE 7—
Connect digital video equipment to this
jack. It takes only one cable (not sup-
plied) to communicate between
audio/video equipment and this DTV.
HDMI (DVI) INPUT1 jack is compatible
with DVI equipped AV devices. (Sepa-
rate audio connection and an adapter
are required for DVI device.)
See
PAGES 18 and 19 for HDMI connec-
tion.
Digital Audio Output—Use a Phono-Type
Coaxial Digital Audio Out Cable to connect
Digital Audio Output to an advanced stereo
home theater system equipped with Dolby
®
Digital 5.1.
See PAGE 26 for Digital Audio
Out jack connection.
Audio/Video Input (VIDEO1)—Connect
analog video equipment here.
See PAGES 23,
24, and 25 for AV VIDEO1 jack connection.
Note: S-Video connection overrides the (Video1) com-
posite video connection.

Table of Contents

Other manuals for Sanyo DP50747

Related product manuals