9
Tools Needed: Phillips screwdriver
Important Note: Place DTV face down on a padded
or cushioned surface that is larger than the screen
size to protect the screen and finish. Handling by
more than two people is recommended.
1
Remove four (4) screws from the metal bracket.
CAUTION: Hold the stand firmly as you remove
the last screw.
2
Carefully remove the stand.
REMOVING THE STAND (OPTIONAL)
Use the threaded inserts on the back of your Plasma
DTV to secure it using a wall mounting kit.
(UNIVERSAL standard interface 480 x 200 and 480 x
360.)
Note: Wall Mounting kit is not supplied.
Mounting screws measurements:
M6 Diameter, Length—12mm (maximum).
WALL MOUNTING (OPTIONAL)
To Next Page
Loading...
