Operations with DVD (Continued)
Playing a DVD (continued)
Time Search
The Time Search function allows you to start playing at
any chosen time on the disc.
1 Press DISPLAY twice during playback. The on-screen
display appears on the TV screen.
The Time Search box shows the elapsed playing time of the
current disc.
2 Within 7 seconds, use v / V to select the Time
Search icon in the on-screen display.
The “-:--:--” appears in the Time Search box.
3 Within 7 seconds, use the number buttons to enter
the required start time. Enter hours, minutes, and sec-
onds from left to right in the box.
You cannot enter an invalid time.
If you enter the wrong numbers, press b / B to move the
under bar (_) to the wrong number. Then enter the correct
numbers.
4 Within 7 seconds, press ENTER to confirm the start
time.
Playback starts from the selected time on the disc.
Zoom
The Zoom function allows you to enlarge the video
image and to move to different areas within it.
1 Press ZOOM during playback or still playback to acti-
vate the Zoom function.
A square frame will be displayed in the right bottom of the
picture. If no button is pressed for more than 5 seconds, the
square frame will disappear.
Each press of the ZOOM button changes the image on the
TV screen in the following sequence:
X1(normal size) → X2 size → X4 size → X1(normal size)
2 Use the b / B / v / V buttons to move to different
areas within the picture.
3 To resume normal playback, press CLEAR or ZOOM
repeatedly until the normal picture appears.
ote
The Zoom function may not work for some DVDs.
Marker Search
You can start playback from a memorized point. Up to
six points can be memorized.
To enter a mark, follow these steps.
1 During disc playback, press MARKER when
playback reaches the spot that you want to
memorize.
The Marker icon will appear on the TV screen briefly.
2 Repeat step 1 to enter up to six Marker points on a
disc.
To Recall a Marked Scene
1 During disc playback, press SEARCH.
The Marker Search menu will appear on the TV screen.
2 Use the b / B / v / V buttons to select a Marked
scene that you want to recall.
3 Press ENTER.
Playback will start from the Marked scene.
4 To remove the Marker Search menu, press RETURN.
To clear a Marked Scene
1 During disc playback, press SEARCH.
The Marker Search menu will appear on the TV screen.
2 Use b / B / v / V to select the Marked scene that
you want to erase.
3 Press CLEAR.
“Delete selected marker. Continue?” message appears.
4 Use b / B to select “Yes”, then press ENTER.
5 Repeat steps 2-4 to erase additional Marked scenes.
6 To remove the Marker Search menu,
press RETURN (O).
ote
Memorized marker points are deleted when the
VCR/DVD Recorder is turned off.
To Next Page
Loading...