TO HANG THE SPEAKERS AND/OR MAIN UNIT
ON A WALL
1. Place the bracket on the wall where you want to hang the speaker
(or main unit).
2. Secure the brackets on the wall using 5 screws each (not supplied).
3. Mount the speaker (or main unit) onto the wall bracket.
Note: Before mount the main unit, unscrew the base first.
-3-
This system has transparent protective sheet on the front panel to pro-
tect it from scratches. If desired, you may remove the sheet before use.
DTA-200/UK 5/25/04, 9:36 PM4
To Next Page
Loading...
