EasyManua.ls Logo

Sanyo EM-P494WS - User Manual

Sanyo EM-P494WS
27 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
Loading...
CAUTIONCAUTION
CAUTIONCAUTION
CAUTION
WW
WW
W
ARNING TO SERARNING TO SER
ARNING TO SERARNING TO SER
ARNING TO SER
VICE TECHNICIANSVICE TECHNICIANS
VICE TECHNICIANSVICE TECHNICIANS
VICE TECHNICIANS
PRECAUTIONS TO BE OBSERVED BEFORE AND DURING
SERVICING TO AVOID POSSIBLE EXPOSURE TO
EXCESSIVE MICROWAVE ENERGY
(a) Do not operate or allow the oven to be operated with the door open.
(b) Make the following safety checks on all ovens to be serviced before activating the magnetron or other
microwave source, and make repairs as necessary :
(1) Interlock operation, (2) proper door closing, (3) seal and sealing surfaces (arcing, wear, and other damage),
(4) damage to or loosening of hinges and latches, (5) evidence of dropping or abuse.
(c) Before turning on microwave power for any service test or inspection within the microwave generating
compartments, check the magnetron, wave guide or transmission line, and cavity for proper alignment, integrity,
and connections.
(d) Any defective or misadjusted components in the interlock, monitor, door seal, and microwave generation and
transmission systems shall be repaired, replaced, or adjusted by procedures described in this manual before
the oven is released to the owner.
(e) A microwave leakage check to verify compliance with the Federal performance standard should be performed
on each oven prior to release to the owner.
REFERENCE NO. SS-860237
File No :File No :
File No :File No :
File No :
SUPPLEMENT OF SUPPLEMENT OF
SUPPLEMENT OF SUPPLEMENT OF
SUPPLEMENT OF
MicrMicr
MicrMicr
Micr
owave Ovenowave Oven
owave Ovenowave Oven
owave Oven
EM-P494WS (U.S.A.)EM-P494WS (U.S.A.)
EM-P494WS (U.S.A.)EM-P494WS (U.S.A.)
EM-P494WS (U.S.A.)
SER SER
SER SER
SER
VICE MANUALVICE MANUAL
VICE MANUALVICE MANUAL
VICE MANUAL
The following parts are different from the parts on model EM-P410WS (SM-860236)
Pr Pr
Pr Pr
Pr
oduct Code No.oduct Code No.
oduct Code No.oduct Code No.
oduct Code No.
437 450 30437 450 30
437 450 30437 450 30
437 450 30
See the Service Manual of EM-P410WS (SM-860236)
except the items described in this Service Manual.
Key
Part No. Description
No.
CAVITY PARTS
24 617 198 5580 Detector Assy
25 617 198 5542 Duct, Detector Assy
DOOR PARTS
1 617 198 1636 Door Cover
Key
Part No. Description
No.
CONTROL PANEL PARTS
1 617 220 3621 Control Sheet
2 617 220 3638 Touch Key Board
6 617 225 4005 Power & Control Circuit Board
* 617 220 4093 Operating Instruction
* 617 220 3652 Carton Box Complete
* 617 220 3591 Name Plate

Questions and Answers

  • S
    Sara Patel MDAug 12, 2025
    What to do if cooking operation will not start in Sanyo Microwave Oven?
    • M
      Ms. Samantha HillAug 12, 2025
      If your Sanyo Microwave Oven cooking operation will not start, you can try to: * Check the power supply to the oven. * Check the primary interlock switch. * Check the thermal protector for the magnetron. * Check the continuity of the door sensing switch. * Adjust or replace the door sensing switch.
  • R
    Robin RogersAug 20, 2025
    How to fix low microwave power output in Sanyo EM-P494WS Microwave Oven?
    • R
      Randy FloydAug 20, 2025
      If the microwave power output is low in your Sanyo Microwave Oven, consider the following: * Replace the thermal protector for the magnetron. * Check the operation of the blower motor when the 'START' key is touched. * Replace the control circuit board.
  • K
    Kevin JohnsonAug 27, 2025
    What to do if Sanyo EM-P494WS Microwave Oven display is not working?
    • J
      James RiceAug 27, 2025
      If there is no display or a mis-display in the display window of your Sanyo Microwave Oven when touching the keys, you may: * Replace the control circuit board. * Check the resistance of the touch key board. * Check the power supply voltage on the control circuit board.
  • D
    David TaylorSep 3, 2025
    How to fix magnetron operating on high when lower cook power is selected on Sanyo EM-P494WS?
    • D
      dgeorgeSep 3, 2025
      To resolve the issue of the magnetron operating at a high level when a lower cook power is selected on your Sanyo Microwave Oven, replace the control circuit board.

Sanyo EM-P494WS Specifications

General IconGeneral
BrandSanyo
ModelEM-P494WS
CategoryMicrowave Oven
LanguageEnglish

Related product manuals