EasyManua.ls Logo

Sanyo EM-S5002W - Kitchen Timer Function; Time Cooking Method

Sanyo EM-S5002W
40 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
12
KITCHEN TIMER
You can use the Kitchen Timer function independently, even while a cooking
program is in progress.
Example: To set timer for 3 minutes:
Step Procedure Keypad
1
Press KITCHEN TIMER.
Press 3 0 0 for 3 minutes.
2
Enter the amount of time that you
want to count down using the
number keys. Enter time in minutes
and seconds using up to 4 digits.
3
Press START.
You must press START within
5 seconds after time is entered.
Note:
The countdown time can be seen in the display window for 3 seconds
before clock or cooking time can be viewed.
To cancel kitchen timer, press KITCHEN TIMER and then STOP/RESET.
TIME COOKING
This basic microwave cooking method allows you to cook food for a desired
time. The oven can be programmed for 99 minutes 99 seconds. In addition
to 100% (maximum) power level, you can select different microwave power
from 9 levels, 1-9 (10-90% of total power
level).
KITCHEN TIMER
3 0 0
START
Example: To cook at 80% power level for 20 minutes:
Step
Procedure Keypad
1
Enter a cooking time in minutes and
seconds. Enter 20 minutes by
pressing 2, 0, 0, and 0.
Press POWER LEVEL then use the
number keys to enter the power level.
Use a single digit to enter a power
level:
2
3
Press START.
Note:
If no power level is entered, the power level will always be 100%.
You can add extra minutes while using TIME COOKING. Press
START while cooking is in progress to add time in 1 minute
increments (maximum 99 minutes). This feature cannot be used
with the DIRECT ACCESS programs.
•To check the power level during cooking, press POWER LEVEL.
2 0 0 0
POWER
LEVEL
8
(80 appears in the display)
START
9 90%
8 80%
7 70%
6 60%
5 50%
4 40%
3 30%
2 20%
1 10%

Other manuals for Sanyo EM-S5002W

Related product manuals