Sanyo FVM4012 - Disassembly Procedure; Mechanical Parts Removal



FVM4012 service manual 

 1049

5. Disassembly Procedure
5.1 Removal Of Mechanical Parts
1. Remove the back
cover.
Remove 10
screws(ST3x6)[1] for
RC&PANEL;
Remove 6
screws(ST3x8)[2] for
RC& FC
Remove 2
screw(B3x6)[3] for RC&
AV bracket;
Remove 2
screw(ST3x8)[4] for
RC&AC bracket;
Remove 4
screw(B6x10)[5] for
RC&VESA bracket;
2. Remove the 2
speakers.
Unplug the speaker
wire[1];
Remove 4
screw(ST3x14)[2] for
speaker socket support
and FC;
Take out 2 speakers
from the front cabinet

3. Remove the table
stand bracket.
Remove 4
screw(B4x10)[1] for the
table stand bracket &
PANEL;

1
1
1 1 1 1 1 1
11
1
2 2 2 2 2 2
3
3
4
4
5 5
5 5
1
2 2 2 2
1
1 1
1