Sanyo Katana - Page 113

Section 2D: Controlling Your Roaming Experience 97
To turn Call Guard on or off:
1. Select >Settings > Others > Roaming > Call Guard.
2. Select On or Off.
To place roaming calls with Call Guard on:
1. From standby mode, dial 1 + area code + the seven-digit
number. (You can also initiate a call from the Contacts,
Call History, or Messaging.)
2. Press or (or press Options[right softkey] >Call
or Call:Speaker On).
3. Press to proceed while the pop-up message
is displayed.
– or –
Press any key to erase the pop-up message, and then
press
Options(right softkey) >Roam Call or
Roam:Speaker On.
To answer incoming roaming calls with Call Guard on:
1. Press or . (A message will be displayed
notifying you that roaming charges will apply.)
2. Press to proceed while the pop-up message
is displayed.
– or –
Pr
ess any key to erase the pop-up message, and then
pr
ess
Options(righ
t softkey)
>Ans
wer
or Ans
wer:Speaker
.
Note: If the Call Guard fea
tureis set to
On,you need to take extr
asteps to
makeand receiveroaming calls.
Roaming
6600US.qxd 06.6.20 8:48 AM Page 97