Sanyo KHS0921 - Page 11

Operation with the Remote Control Unit (Continued)
Cooling mode:
Heating mode:
B. Manual
3. Fan Only
When difference between
room temperature and set
temperature is
FAN SPEED
4°F and over
High
Between 4“F and 2°F
Medium
Below 2°F
Low
When difference between
room temperature and set
temperature is
FAN SPEED
2°F and over
High
Below 2°F
Medium
If you want to adjust fan speed manually during cooling, just set the
FAN SPEED selector as desired. [HIGH. MED., or LOW]
If you want to circulate air without any temperature control, follow these
steps:
STEP 1: Set the MODE selector switch to FAN.
STEP 2: Press the ON/OFF operation button.
07 - 346-11
11