Making Use of Time Shift Function
Select
Move
MENU
Return
Check File System
USB Disk
Speed
SELECT
MOVE
Menu
RETURN
Programme Edit
Auto Tuning
DTV Manual Tuning
ATV Manual Tuning
PICTURE SOUND TIME OPTION LOCK CHANNEL
File System
Select Disk
USB Disk
Speed
5112KB/s
Select Disk
Checking File System before Time Shift
Time Shift function is the recording of DTV programme to an external memory device (portable hard disk or USB
device) to be viewed at a later time more convenient to the user. But before operation you must pay attention to the
following notes:
! Before Time Shift, you need to check the File System successfully.
! Do not disconnect the memory device from the TV while time shifting, or the data will be lost.
! When Time Shifting, a directory will be automatically created at the external memory device to temporarily save the data.
! The data cannot be played on any other product or computer.
! The recorder once in time shift mode will continue recording what you are watching and overwrite any information already on the
memory device.
! If malfunction, then information already on the memory device may lose. So please back up your memory device data.
! The file system only supports FAT and FAT32. It is recommended to use external memory device in FAT32 file system, otherwise a disk
formatting is required and all data will lose.
! The external memory device must have enough free space (at least 512MB) for time shift. Recording capacity varies depending on the
memory device’s file system, for the FAT32 file system the maximum capacity is 4GB.
!
When Time Shifting, the external memory device need to write and read data simultaneously. So during the process it may occur slight
picture/sound pause or standstill depending on the memory device's speed and stability.
! After Time Shift, you can connect the memory device to your PC to delete temporary data or format a partition to completely clear
those unnecessary data.
! Certain types of memory device (such as some USB devices) may not be compatible with this TV.
To check File System before Time Shift
1
Connect your USB device or portable hard disk to the USB port on TV
side firstly.
2
Navigate to CHANNEL-File System menu to check file system.
(Press MENU, then use 3or4to select CHANNEL menu, press 6 to
access. Press 5or6 to highlight File System, then press 4to access.)
Now do the following to check file system.
A. Select Disk:
From File System menu, highlight Select Disk, press 4to access.
Use 3or4to select a disk, then move the highlight to OK box and press
OK to confirm. (To cancel, select EXIT to exit).
B. Check File System
From File System menu, highlight Check File System, press 4to start
checking. It may take several minutes, please wait. When finished, if
SUCCESS appears at the Check File System line then you can start
time shift function.
(At File System menu bottom screen, USB Disk state and speed
information will appear, they can not be adjusted)
Making use of Time Shift function – digital only –
After successful File System check, you can use Time Shift function now. Press T.SHIFT button to start time shifting. The
live programme stops at the current state. At the bottom screen, an information box will appear for your help. After
some time, this information box will be minimized in size and glitter on the screen. To restore, please press OK.
Now you can use below buttons to operate:
! : PLAY/PAUSE button
! : STOP button.
! / : Fast forward/fast reverse
! / : Previous/next
29
Current time
Duration
C:
Start
Select Disk
OK EXIT
Disk C:
Check File System
SUCCESS
EXIT
EXIT
OK
OK
Pass
HD support
Select
Move
MENU
Return
EXIT
EXIT
OK
OK
C:
File System
Note:
! If your external memory device is not in FAT32 file system, then during the process of
File System checking, a message appears prompting you to start to create disk
partition. If you want to proceed, operate according to on-screen instructions to
format the disk.
! After File System checking, if “SD Fail” appears on the screen, that indicates this
external memory device is not suitable to be used for time shift, please replace with
other one and try it again. If “SD Support” appears, that means this external device
is suitable to time shift SD program, but not HD program. If “HD Support” appears,
then both SD and HD programs are OK.
File System
To Next Page
Loading...
