Sanyo M-G12 - Headphone Exploded View; Headphone Component Breakdown

ADJUSTMENTS (continued)
HEAD AZIMUTH ADJUSTMENT
1. Open the Cassette Compartment Lid and remove the Azi-
muth Cover from the Lid by pushing it with a tweezers in the
direction of the arrow.
Cassette
Compartment Lid
Azimuth Cover
2. Connect two VTVMs and a synchroscope to the Headphone
Jack as illustrated.
Set the synchroscope as follows:
Pi MMOD vc crease partner tecerin cnet neato. CHOP (chopped)
* “SOURCE +8 acs c acess INT (internal), CH1 or CH2
* AUTO (automatic)
Dummy Load 330,
qn)
Dummy Load
330
anny
IM
jaa=
@
PHONES
3. Insert a 10kHz test tape (Example: TEAC MTT-114) into the
Cassette Compartmnt and play it back. :
—5-—
Azimuth Adjusting Screw
4. While playing back the test tape, slowly turn the azimuth ad-
justing screw until the amplitudes of both channel output
wave forms become maximum and the wave forms overlap
as well as possible in the maximum condition of the VTVM as
iilustrated.
Adjustment
Adjustment
S ry”) Playback Head
5. After the adjustment, secure the adjusting screw with paint
or glue.