Sanyo MAJ-R70 - Page 11

EN-10
Search forward playback (forward/reverse)
Press and holding down the F or B button
during playback ,it will search at high speed in
the forward or reverse direction.
When the button is released, normal play will
continue.
Repeat playback
Press the REPEAT button before or during play-
back to select the repeat playback mode.
- Press the button once,”REPEAT1 ”appears,
the
unit will repeat single track.
- Press the button again,”REPEAT ALL”
appears,the unit will repeat all tracks and
all programme tracks.
Random playback
(Remote control only)
Press the RANDOM button on unit or
RAND/INTRO on remote controll in playing
or stop mode. “RANDOM” appears on the
display. All tracks are played in random
order during playback.
Intro playback
(Remote control only)
Press the “MONO/ST./INTRO” on unit or
“RAND/INTRO”button on the remote controller in
playing or stop mode. ”INTRO”appears on the
display. All tracks are played first 10 second.
Program playback
Up to 32 tracks can be programmed for playback
in any order.
- First,select “CD FUNCTION” and load a
disc that you want to programme.
1. Press the MEMO/CLK ADJ button (or the ME-
MO/CLOCK button on the remote controller)
in the stop mode,”PROG.” appears.
2.Press the B or F button to select a track.
3. Press the MEMO/CLK ADJ button (or the ME-
MO/CLOCK button on the remote controller)
4. Repeat steps 2-3 above to programme addi-
tional tracks.
5. Press the
R/ P button (or the CD R/ P button on
CD the remote controller) to start programme play-
playback.
- When all programmed tracks have been
played, it stops automatically.
- If you try to enter more than 32 tracks,”FULL”
appears on the display.
Changing a programme
To change a track
1. In the stop mode ,press the MEMO/CLK
ADJ button or
( the MEMO/CLOCK button on the remote
controller) repeatedly until the track number
to be replace is displayed.
2.Press the F or B button to select a track
as descirbed above.
3. Press the MEMO/CLK ADJ button (or the
MEMO/CLOCK button on the remote con-
troller).
To add a new track to a programme
1. In the stop mode,press the MEMO/CLK
ADJ button (or the MEMO/CLOCK button
on the remote controller) repeatedly until
”p---XX ” fl ash.
Example:
2. Press the F or B button to select a track
as described above.
3. Press the MEMO/CLK ADJ button (or the