Sanyo MCD-Z330F User Manual

Number buttons (1-9, O)
If the function is “CD”, the buttons select the
track numbers on a disc.
If the function is”RADIO’’,the buttons select pre-
set radio stations.
With any other function,the buttons will not func-
tion.
i
- Two buttons must always be pressed.
Example:
To select No.3, press O, then 3.
To select No.1 O, press 1, then O.
;
To select No.25, press 2, then 5.
Installing batteries
Install two “AANR03” batteries (not supplied) as
shown below.
IE2!ll
Q
@
@)
Q
GENERAL
..—.—----- ...%.... . .. . - . .
., . . ..-.
Adjusting the volume
Turn the VOLUME control (or press the + or -
VOLUME button on the remote control). The vol-
ume level appears on the display (VOL O to VOL
40).
Q sound button
Press the QSOUND button to ON. A 3 dimen-
sional sound effect is created.
Bass expander button
Press the BASSXPANDER button to ON to en-
hance the bass sound.
NOTE:
If the volume level is set to “VOL.30” or more, the
bass expander effect may reduce depending on
the input sources.
Headphones
Connect stereo headphones (not supplied) to the
PHONES socket for monitoring or for private
listening. The speakers are automatically discon-
nected when headphones are connected.
Remote control range
/r/-
(
-
/ \
Remote control sensor
window
/ 1+ within WWOX. 7 meters
rll
7& {!j”
n
000
000
000
0
m
OD
Oclo
‘a
OPERATION
. .. . .
.. .,.,..,,-. --
The buttons on the re-
mote control perform
similar functions to simi-
larly marked buttons on
the front panel.
. ,. ...... ....
.....,
WHAT TO DO IF ...
If the operation of the unit or display is not
normal.
1.
2.
3.
4.
5.
Set the function (TAPE/CD/RADIO) switch to
CD or RADIO.
Disconnect the mains lead from the unit and
remove all batteries.
Press the BAND button on the front panel for
at least 1 minute.
Connect the mains lead. and install all batter-
ies.
Operate the unit.
,
‘!
,.
,.
-4-
—

Sanyo MCD-Z330F Specifications

General

Brand	Sanyo
Model	MCD-Z330F
Category	Cassette Player
Language	English