Use compact discs bearing the symbol shown
below. In addition to conventional 12 cm CDs,
this system can be used to play 8 cm CDs with-
out an adapter.
~THg
DIGITAL AUDIO
1.
2.
3.
4.
5.
Set the function ( TAPE /CD/RADIO) switch to
CD.
Press the CD OPEN button. The CD compart-
ment opens.
Place the disc with the label facing upon the
turntable. (Place only one disc at a time.)
Label faci~g up \
Press the CD compartment to close it
The total playing time and total number of
tracks on the disc appear.
Press the PIAY/PAUSE button.
I
lR
I
6.
7.
. .../
- To start play from the desired track, se-
lect the track by using the SKIP/SEARCH
buttons (or number buttons on the re-
mote control), then press the PLAY/
PAUSE button. )
Note:
If a disc is loaded upside down, or if no disc
is loaded, the CD player will not operate.
Press the STOP/CLEAR button to end disc [
play.
When the last track has been played, the
player stops automatically.
To turn the CD cdaver off, set the function
switch to TAPEIOF;.
Note:
Do not open the CD compartment during CD
play. Always press the STOP/ CLEAR button and
wait for the disc to stop rotating before opening
the CD compartment.
Notes on handling compact discs
Do not expose the disc to direct sunlight,
high humidity or high temperatures for ex-
tended periods of time.
Discs should be returned to their cases after
use.
Do not apply paper or write anything on the
disc surface.
Handle the disc by its edge. Do not touch the
playing surface (glossy side).
Fingerprints and dust should be carefully
wiped off the playing surface of the disc with
a soft cloth.
Wipe in a straight motion from the centre to
the outside of the disc.
Never use chemicals such as record cleaning
sprays, antistatic sprays or fluids, benzene or
thinner to clean compact discs.
To Next Page
Loading...
Need help?
General
