(PA)
,
DIAGRAM (MAIN)
➤ ._._
.—. — .—. — .—. _ .—. — .—. — .—. — .—. — .—. — .—. — -—-— .—-— .—. ~.—
:YI,C6
At?-MUTE W!
SYNC REC CM
+5. 6V
ACSENS :
FLWi ~
FLWC2 CM
VOL CK
CN7
vOL STB w
VOL DATA CM
G60LF40 M,*
PRODUCT SAFETY NOTICE
r
Each precaution in this manual should be followed during servicing. Components identified with the IEC symbol A in the parts list and the schematic
diagram designated components in which safetycan beof specialsignificance.When replacinga component identified by A , use only the replacement
parts designated, or parts with the same ratings of resistance, wattage or voltage that are designated in the parts list in this manual. Leakage-current
or resistance measurements must be made to determine that exposed parts are acceptably insulated from the supply circuit before returning the
product to the customer.
This is a basic schematic diagram.
-—”*—
1
j
‘;
‘,,, ..)
-17-
To Next Page
Loading...
