EasyManua.ls Logo

Sanyo MDF-U7386SC User Manual

Sanyo MDF-U7386SC
37 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
Page #1 background imageLoading...
Page #1 background image
38
Instruction manual
xThis section is extracted and printed from Instruction Manual.
xIf you find out “Refer to page
ƔƔ” in them, this page means not page in service manual
but page in the lower corner of each page in the extract from Instruction manual.
This page number is not corresponded with serial number in Service manual.
Question and Answer IconNeed help?

Do you have a question about the Sanyo MDF-U7386SC and is the answer not in the manual?

Sanyo MDF-U7386SC Specifications

General IconGeneral
ModelMDF-U7386SC
CategoryFreezer
Temperature Range-50°C to -86°C
Number of Doors1
TypeUpright Freezer
Power Supply220V, 50Hz

Summary

Introduction

Precautions for Safe Operation

Environmental Conditions

Freezer Components

Control Panel and Keypad

Explains the control panel buttons, indicators, and their functions.

Installation Site

A Location Not Subjected to Direct Sunlight

Advises against installing the unit where it will be exposed to direct sunlight.

A Location with Adequate Ventilation

Specifies the need for at least 10 cm clearance for proper ventilation.

A Location Away from Heat Generating Sources

Recommends avoiding installation near heat-emitting appliances.

A Location Not Prone to High Humidity

Warns against humid places or exposure to water to prevent damage and shock.

A Location Without Flammable or Corrosive Gas

Advises against flammable or corrosive gas environments to prevent explosion or corrosion.

Installation

Remove Packaging and Tapes

Instructions for removing shipping materials and initial cleaning.

Adjust the Leveling Foot

Details on how to adjust the unit's leveling feet for stability.

Fix the Unit

Guidance on securing the unit to the wall using provided fixtures.

Ground (Earth)

Emphasizes the importance of proper grounding for electrical safety.

Start-Up of Unit

Temperature Setting

Chamber Temperature

Procedure for setting the desired internal chamber temperature.

Key Lock Function

Explains how to enable or disable the keypad lock.

Alarm Temperature Setting

Alarms & Safety Functions

Setting of Alarm Resume Time

Remote Alarm Terminal

Change of Compressor Delay Time

Routine Maintenance

Cleaning of Cabinet

Instructions for cleaning the exterior and interior surfaces of the unit.

Cleaning of Condenser Filter

Procedure for cleaning the condenser filter to maintain cooling performance.

Defrosting of Inside Wall

Steps for removing frost buildup from the freezer's inner walls.

Trouble Shooting

Replacement of Battery

Location of a Nickel-metal-hydride Battery

Identifies the location of the battery for the power failure warning device.

Removal of Nickel-metal-hydride Battery

Detailed steps for safely removing the battery.

Disposal of Unit

Recycle of Battery

Information on the recyclability of the unit's rechargeable battery.

Back-Up System [Option]

Temperature Recorder [Option]

Inventory Rack

Specifications

Safety Check Sheet

Related product manuals