To Next PageTo Next Page
Need help?Do you have a question about the Sanyo MLR-350HT and is the answer not in the manual?
Steps for setting up shelves, water supply, and connecting power to start the unit.
Explanation of the control panel's display sections, buttons, and input functions for operation.
How to set high and low temperature limits for the alarm system and safe operation.
Detailed steps for setting up temperature programs with multiple steps, patterns, and cycles.
Steps for setting up shelves, water supply, and connecting power to start the unit.
Explanation of the control panel's display sections, buttons, and input functions for operation.
How to set high and low temperature limits for the alarm system and safe operation.
Detailed steps for setting up temperature programs with multiple steps, patterns, and cycles.
General| Category | Test Equipment |
|---|---|
| Model | MLR-350HT |
| Manufacturer | Sanyo |
| Recording Media | Magnetic tape |
| Signal-to-Noise Ratio | 60 dB |
| Input Impedance | 50 kΩ |
| Output Impedance | 600 Ω |
| Power Supply | AC 100V, 50/60Hz |
