Sanyo mpr-214f - Commercial Solutions Refrigerator - Page 18

17
OPERATING INSTRUCTIONS
Table 5
Operation Key operated Indication after operation
1 -----
The current refrigerator temperature
is displayed.
2
Press and hold the numerical value
shift key for about 5 seconds.
The first digit of the temperature
display blinks.
3
Set the first digit to 2 with the
numerical value shift key. (Note 1)
The first digit of the temperature
display blinks.
4 Press the set key. SET
The current set value is displayed
and the first digit of the temperature
display flashes.
Pressing the key leads the change of flashed
digit.
5
Set to -03 by using digit shift key
and numerical value shift key.
Pressing the key shifts up the figure
of the current digit.
6 Press the set key. SET
The value is stored in memory and
the current refrigerator temperature
is displayed.
Note 2: For the freezer, set the first digit to 4 (F04).