31
SPECIFICATIONS
Name Pharmaceutical Refrigerator with Freezer
Model MPR-214F
External dimensions W540 x D557 (+ 45)* x H1794 (mm)
Internal dimensions W455 x D466 x H917 (mm) (Refrigerator)
W420 x D342 x H267 (mm) (Freezer)
Effective capacity 176 L (Refrigerator), 39 L (Freezer)
Exterior Zinc galvanized steel, Polyester resin baked finish
Interior Stainless steel (Refrigerator), Painted aluminum plate (Freezer)
Door Acrylic finish baked on zinc galvanized steel
Insulation Rigid polyurethane foamed-in place (CFC-FREE)
Shelf Polyethylene coated wire
<Refrigerator> 3 shelves, Inner dimensions: W388 x D325 (mm) Max. load; 20 kg/shelf
<Freezer> 1 shelf, Inner dimensions: W327 x D250 (mm) Max. load; 10 kg/shelf
Access port Inner diameter 30 mm, 2 ports on the left side (refrigerator, freezer)
Cooling method Forced air circulation (Refrigerator), Direct cooling (Freezer)
Compressor Hermetic reciprocating type, Output; 60 W x 2
Evaporator Fin and tube type (Refrigerator), Tube on sheet type (Freezer)
Condenser Wire and tube (Refrigerator), Rear side condenser (Freezer)
Refrigerant R-134a (Refrigerator, Freezer)
Defrosting Cycle defrost and forced defrost (Refrigerator)
Natural defrost by stopping operation (Freezer)
Defrost heater 46.3 W (Refrigerator)
Temperature controller Microprocessor control system
Temperature display Digital display
Thermal sensor Thermister sensor (Refrigerator, Freezer)
Alarm & Safety High temp. alarm, Low temp. alarm, Power failure alarm, Door alarm
Over-heat protector (Refrigerator), Over-cool protector (Refrigerator)
Key lock, Thermal sensor abnormality
Memory backup Nonvolatile memory
Lamp (Refrigerator) 1 Incandescent lamp (T22E17) 125V, 10W (for 110V, 115V)
250V, 15W (for 220V, 230V, 240V)
Weight 81 kg
Accessories 1 set of key, 2 large clips (for temperature recorder)
Option Automatic temperature recorder for refrigerator (MTR-0620LH)
Automatic temperature recorder for freezer (MTR-4014LH), Recorder fixture (MPR-S30)
Automatic temperature recorder (MTR-G3504), Recorder fixture (MPR-S7)
Note :Design or specifications will be subject to change without notice.
* The value in the parenthesis means the dimension of projected area.