24
INSTALLATION OF TEMPERATURE RECORDER
Installation of recorder MTR-0620LH (2)
1. Remove a cap for the fixing screw on the panel cover for mounting space of temperature recorder.
Remove the fixing screw and open the panel cover. Remove the panel cover by pushing the shaft on
both sides outward. (Fig. 5)
2. Attach the temperature recorder (MTR-0620LH) to the recorder fixture (MPR-S30: optional component)
by referring to the instruction manual enclosed with the recorder fixture. (Fig. 6)
3. Remove the cap on the port for taking out the recorder sensor and take out the recorder sensor.
Then set the recorder fitting to the space of temperature recorder. (Fig. 7)
Fig. 5
Cover panel
Shaft
Fixing screw
Fig. 6
Fig. 7
To Next Page
Loading...
