Sanyo PLC-XW250 Command List

1/1

PLC-XW200/250 IR Command List
  □ Transmission format of LCD projector operation key
    : NEC Format (single command / command pipelining mode)
  □ Custom Code + Custom Code
: 2 patterns as below
    33h+00h(Default;code1), 33h+11h(code2)
Key
No.
Data Code
(HEX)
Function
1 17 AUTO SET
2 00 ON-OFF
3 38 COMPUTER 1
4 39 COMPUTER 2
5 3D VIDEO
6 3E S-VIDEO
7 83 COMPONENT
8 8C CURSOR UP
9 1E CURSOR LEFT
10 0F SELECT
11 1D CURSOR RIGHT
12 8D CURSOR DOWN
13 1C MENU
14 82 SCREEN
15 5B KEYSTONE
16 16 INFORMATION
17 43 FREEZE
18 8B NO SHOW
19 8A P-TIMER
20 18 LAMP CONTROL
21 01 D.ZOOM +
22 09 VOLUME +
23 0C IMAGE
24 02 D.ZOOM -
25 0A VOLUME -
26 0B MUTE

Sanyo PLC-XW250 Specifications

General

Brightness	2500 ANSI Lumens
Contrast Ratio	2000:1
Lamp Life	2000 hours (Normal Mode) / 3000 hours (Eco Mode)
Weight	3.4 kg (7.5 lbs)
Dimensions	326 x 94.3 x 246.5 mm (12.8 x 3.7 x 9.7 inches)
Display Technology	LCD
Aspect Ratio	4:3
Projection Size	30 to 300 inches
Power Consumption	270W (Normal Mode) / 230W (Eco Mode)
Resolution	1024 x 768 pixels (XGA)
Throw Distance	1.2 to 10.0 m
Lamp Type	UHP
Input Ports	S-Video
Output Ports	Audio