Sanyo SAP-C97GHAX - Page 71

5
Remote Control Unit (Display)
(1) Operation mode
AUTO .....................................
HEAT ......................................
MILD DRY ..............................
COOL.....................................
FAN ........................................
(2) Fan speed
Automatic operation ...............
HIGH .....................................
MEDIUM.................................
LOW.......................................
(3) Temperature setting
16–30°C
When set to 28 °C
temperature indication............
(4) Timer
12-hour ON Timer. .................
12-hour OFF Timer. ...............
1-hour OFF Timer. .................
(5) ECONOMY ............................
(6) Confirmation
of transmission.......................
(7) Auto. flap indication..........................
Flap angle indication..............
Sweep indication....................
Displayed when
setting timer
Displayed when
transmitting data
Displayed when
indoor unit
sensor is in use
Symbols