To Next PageTo Next Page
Need help?Do you have a question about the Sanyo SAP-CMRV1936EH and is the answer not in the manual?
General| Capacity | 1.5 Ton |
|---|---|
| Star Rating | 3 Star |
| Refrigerant | R410A |
| Type | Split AC |
| Heating Capacity | 18000 BTU/h |
| Power Supply | 50 Hz |
| Operating Temperature (Cooling) | 43 °C |
| Operating Temperature (Heating) | 24 °C |
Details the technical specifications of the outdoor unit.
Technical details of major components within the outdoor unit.
Specifications for other components not covered in major specifications.
Diagram illustrating the flow of refrigerant through the system.
Charts showing performance under various temperature conditions.
Wiring diagrams for the outdoor unit's electrical system.
Detailed explanation of the air conditioner's operational functions.
Explains the safety and protective mechanisms of the system.
Important safety precautions before performing any inspection or repair.
Using error lamps on the control board to diagnose system faults.
Procedures for checking the outdoor unit and its operational status.
Guides for diagnosing problems with individual parts of the system.
Troubleshooting steps for diagnosing issues with the fan motor.
Key characteristics and properties of R410A refrigerant.
A checklist of items to verify before commencing service.
List of specialized tools required for working with R410A refrigerant.
Detailed procedure for replacing a malfunctioning compressor.
Steps to follow in the event of a refrigerant leak in the system.
Guidelines for adapting existing systems for new refrigerants.
Lists of compatible indoor and outdoor unit combinations for this appendix.
List of tools needed for installation that are not included with the unit.
Details on the correct type of copper tubes and insulation material.
Guidelines for selecting the optimal installation site for the indoor unit.
Guidelines for selecting the optimal installation site for the outdoor unit.
Diagram illustrating the recommended placement and spacing for the outdoor unit.
Explanation of the flaring method used for connecting refrigerant tubes.
Step-by-step guide on performing the flaring procedure correctly.
Detailed steps for making proper refrigerant tubing connections.
Guidance on insulating refrigerant tubing to prevent heat loss and condensation.
Procedure for purging air and moisture from the refrigerant system using a vacuum pump.
General safety precautions and best practices for wiring the unit.
Diagram showing the overall wiring system for the air conditioner.
Instructions on how to properly connect wires to the unit's terminals.
An introductory note listing the available combination tables.
