Sanyo Sprint KATANA - Page 50

36 Section 2B. Settings
Selecting RingerTypes for Messages
1. Press Menu > Settings > Sounds > RingerType >
Messages.
2. Select Text Message, Picture Mail, Voicemail,
VoiceSMS, or Email.
3. ForVoicemail, skip to step 4. Otherwise, select
Default, Contact Entries, or Unknown #s.
n
If you select Contact Entries, select All Contacts or
One Contact.
4. Select a category, and then use your navigation key
to scroll through the available ringers. A sample
ringer will sound as you highlight each option.
5. Press to assign a ringer.
Selecting a RingerType for Alarms, Power
On/Off Tone, or Scheduled Events
1. Press Menu > Settings > Sounds > Ringer Type.
2. Select Alarm, Power On, Power Off, or Schedule.
3. Select a category, and then use your navigation key
to scroll through the available ringers. A sample
ringer will sound as you highlight each option.
4. Press to assign a ringer.
Selecting Vibrate Types
With this feature, you can select vibrate types for
incoming calls, messages, alarms, and scheduled
events.
1. Press Menu > Settings > Sounds > Vibrate Type.
2. Select Incoming Calls, Messages, Alarm, or Schedule.
n
Incoming Calls: select Default Vibrate or Unknown #s.
n
Messages: select Text Message, Picture Mail,
Voicemail, VoiceSMS, or Email.
3. Select a vibrate type and press .