Need help?Do you have a question about the Sanyo ST-21SF1K and is the answer not in the manual?
Instructions for handling the TV set after removing it from its packaging.
Procedure for inserting batteries into the remote control unit.
Guide for connecting a VCR to the television for signal input.
Instructions for connecting the TV to a power source.
Steps to power on the television set for the first time.
Automatic channel tuning and sorting system for initial TV setup.
Navigating and adjusting settings within the TV's on-screen menu.
Configuring the TV to receive signals from VHF/UHF or Cable.
Re-scanning for available TV channels.
Setting the TV to automatically switch off after a specified time.
Restricting access to specific channels by setting them as private.
Accessing channels that have been set to private.
Disabling the private channel restriction.
Connecting external devices like VCRs or camcorders to the TV.
Connecting the TV to another VCR for recording or dubbing.
To Next Page
General
