15
When there is a channel you do not use,
Channel 4 for example, by setting the
SKIP Channel function it is possible to
jump over this channel, when you are
selecting a channel using the CHANNEL
▲ (up) or ▼ (down) key.
For example, to set channel “4” as
Skip channel ;
1
Press MENU. The Main Menu will
appear. (See page 13.)
2
Press the CHANNEL ▲ (up) or ▼
(down) key to select PRESET,
then press the VOLUME + or – key.
3
Press the CHANNEL ▲ (up) or ▼
(down) key to select CHANNEL.
4
Select channel that you want to skip
with the VOLUME + or
-
key, (for this
example is channel “4”)
.
For cable channels above 99, press
and hold the 1 key until C1 – –
appears. Then press the other two
digits.
5
Select SKIP by pressing the
CHANNEL ▲ (up) or ▼ (down) key.
6
Press the VOLUME + or
-
key to set
SKIP to ON. To cancel Skip Channel
function, set to OFF.
7
Select MEMORY by pressing the
CHANNEL ▲ (up) or ▼ (down) key.
8
Press the VOLUME + or
-
key to
memorize.
9
Press MENU key to exit.
➧
Select CHANNEL that you want to SKIP
➧
Select SKIP by pressing CHANNEL ▲
(up) or ▼ (down) key
Press Volume + or – key to memorize
➧
To Next Page
Loading...
