To Next PageTo Next PageWhat to do if Sanyo STW-2 air is not always cool?
If your Sanyo Air Conditioner is blowing air that isn't always cool during cooling operation, the Fan Cycle Switch might be set to Fan Cont (continuous). This setting causes the fan to blow room air even when the compressor is off. Adjust the Fan Cycle Switch to resolve this.
Why is my Sanyo STW-2 Air Conditioner not cooling or heating properly?
If your Sanyo Air Conditioner isn't cooling or heating as expected, several factors could be at play. First, the unit might be waiting for the compressor overload protector to reset; allow some time for it to cool down or warm up. Check for any obstructions like curtains, blinds, or furniture blocking the airflow and remove them. Ensure the thermostat is set appropriately, adjusting it to a lower or higher position as needed. A dirty air filter can also impede airflow, so clean it at least once every two weeks. Lastly, verify that the ventilation control isn't set to the OPEN position, which allows outside air to enter the room; adjust accordingly.
How to fix a Sanyo Air Conditioner that does not operate?
If your Sanyo Air Conditioner isn't operating, make sure the power cord is properly plugged in and that the circuit breaker hasn't tripped.
Why is the air from my Sanyo STW-2 Air Conditioner not always hot?
If your Sanyo Air Conditioner is blowing air that isn't always hot during heating operation, it might be because the Fan Cycle Switch is set to Fan Cont (continuous). This makes the fan blow room air even when the electrical heater is off. Change the Fan Cycle Switch setting.
General| Brand | Sanyo |
|---|---|
| Model | STW-2 Series |
| Category | Air Conditioner |
| Language | English |
Guidance on choosing an appropriate site for installing the air conditioner.
Important safety guidelines for operating and using the air conditioner.
Explanation of the control panel layout and operational modes.
Details on removing and reinstalling the front grille for access to internal components.
Instructions for adjusting the direction of the air louvers for optimal airflow.
Description of the fan cycle switch for controlling fan operation with the compressor.
Guidance on cleaning air filters and the unit's exterior for optimal performance.
Explanation of the automatic freeze protection feature to prevent damage.
Recommendations for optimizing energy consumption and reducing costs.
Common problems and their potential causes and solutions for the air conditioner.
Essential safety warnings and precautions for installers and service personnel.
Detailed steps for making permanent electrical connections for 230/208V and 265V units.
Instructions for adjusting temperature limiting screws for user comfort and control.
Information on controlling the unit via optional remote controllers.
Details on connecting the unit for control from a front desk system.
Essential information to have ready for service or inquiries about the product.
