To Next PageTo Next PageHow to improve the cooling efficiency of my Sanyo SA-186P Air Conditioner?
If your Sanyo Air Conditioner isn't cooling effectively, check a few things: First, make sure that neither the air inlet nor the outlet is obstructed. Second, identify and remove any heat sources in the room. Next, inspect the air filters to see if they're excessively dirty. Finally, verify that the indoor fan speed isn't set to LOW.
Why is foggy air flowing out of my Sanyo SA-186P?
If your Sanyo Air Conditioner is emitting foggy air in COOL mode, it's because the humid air in the room is being rapidly cooled.
Why does my Sanyo Air Conditioner not operate for about 3 minutes when restarting?
If your Sanyo Air Conditioner doesn't start immediately after restarting, don't worry. This is a built-in protection mechanism. Simply wait approximately three minutes, and the unit will automatically resume operation.
What to do if my Sanyo SA-186P does not operate at all?
To troubleshoot why your Sanyo Air Conditioner isn't turning on, consider the following: Is there a power outage? Is the unit unplugged? Has a fuse blown, or is a switch off? Is the voltage outside the range of 207V to 253V?
General| Brand | Sanyo |
|---|---|
| Model | SA-186P |
| Category | Air Conditioner |
| Language | English |
Specifies outdoor/room temperature and humidity for cooling.
Advice on professional installation and voltage checks.
Guidance on choosing an installation site for the unit.
Instructions on choosing space and preparing installation hole.
Using iron supports for stability if needed.
Advice on using sunshade boards for protection.
Procedures and advice for moving the unit to another location.
Tips for minimizing noise and vibration during operation.
Guidelines for safe and proper electrical connections.
Explanation of how to adjust airflow direction.
Controls the side-to-side airflow movement.
Selects fan speed and cooling modes.
Adjusts the desired room temperature.
Step to access controls.
Instructions for connecting power safely.
How to select fan speed and cooling modes.
Guidance on setting the desired temperature.
How to control airflow direction.
Tips for efficient and comfortable use.
Important safety instructions for use.
Warnings about misuse, heat, and airflow exposure.
Steps for cleaning the unit and its air filter.
Reminders to check earth wire and air vents.
Common issues and their solutions.
Conditions that necessitate stopping operation and contacting a dealer.
Information for registering the product warranty.
Details of the product's warranty coverage and terms.
Conditions not covered by the product warranty.
