To Next PageTo Next PageHow to improve the cooling efficiency of my Sanyo SA-126P?
If your Sanyo Air Conditioner isn't cooling effectively, check a few things: First, make sure that neither the air inlet nor the outlet is obstructed. Second, identify and remove any heat sources in the room. Next, inspect the air filters to see if they're excessively dirty. Finally, verify that the indoor fan speed isn't set to LOW.
Why is foggy air flowing out of my Sanyo Air Conditioner?
If your Sanyo Air Conditioner is emitting foggy air in COOL mode, it's because the humid air in the room is being rapidly cooled.
Why does my Sanyo SA-126P Air Conditioner not operate for about 3 minutes when restarting?
If your Sanyo Air Conditioner doesn't start immediately after restarting, don't worry. This is a built-in protection mechanism. Simply wait approximately three minutes, and the unit will automatically resume operation.
What to do if my Sanyo SA-126P does not operate at all?
To troubleshoot why your Sanyo Air Conditioner isn't turning on, consider the following: Is there a power outage? Is the unit unplugged? Has a fuse blown, or is a switch off? Is the voltage outside the range of 207V to 253V?
General| Power Supply | 220-240V, 50Hz |
|---|---|
| Refrigerant | R22 |
| Type | Window |
| Cooling Capacity | 12000 BTU/h |
| Operating Temperature (Cooling) | 18°C to 43°C |
Window type room air conditioners regulate room temperature and humidity, suitable for various environments.
In hot weather, the air conditioner cools the room by expelling heat outdoors.
Allows fresh air circulation into the room by opening the storm door.
Specifies optimal outdoor, room temperature, and humidity ranges for effective cooling.
Details voltage, circuit, and earthing requirements for safe and efficient operation.
Advises professional installation to prevent damage and voiding warranty.
Guidelines for selecting the best location, considering drainage, interference, and environmental factors.
Instructions on choosing installation space and preparing the mounting hole.
Steps for installing the unit, including panel removal, hole insertion, and securing.
Tips on using iron supports and sunshade boards for proper installation and protection.
Procedure for setting up an outside drain for condensation, potentially affecting performance.
Instructions on relocating the unit, requiring professional assistance and potential charges.
Guidance on installing in a firm location and avoiding noise inconvenience to neighbors.
Requirements for reliable grounding, exclusive circuits, and appropriate circuit breakers.
Diagram showing the location of various parts of the air conditioner.
Explanation of the vertical airflow direction vane for controlling air discharge.
Explanation of the ventilation lever's function for air expulsion or circulation.
Overview of the main control panel, including air swing switch and control knobs.
Step-by-step guide for operating the air conditioner, including power, controls, and settings.
Tips for efficient operation, including temperature setting, window management, and airflow adjustment.
Recommendation to clean the air filter regularly to maintain dehumidifying effects.
Advice on occasional room ventilation even with windows closed.
Safety warnings regarding plug accessibility, laundry use, and damaged power cords.
Warnings against misuse, blocking vents, inserting objects, and direct exposure to airflow.
Guidance on appropriate temperatures for sensitive occupants and avoiding excessive heat.
Caution to wait at least 3 minutes before restarting after switching off during cooling.
Instructions for cleaning the unit, including plug removal, panel cleaning, and avoiding chemicals or water splashes.
Detailed steps for removing, cleaning, and drying the air filter.
Importance of checking earth wire and ensuring clear air inlets/outlets for efficiency.
Troubleshooting steps for when the unit does not operate at all.
Checks for factors affecting cooling efficiency, like air blockage, heat sources, and filter cleanliness.
Explanation for foggy air during rapid cooling due to high room humidity.
Identifying causes of noise, such as freon flow or water processing.
Explanation for condensation occurring when cooling warm room air.
Reason for a 3-minute delay before restart to protect the mechanism.
Section for registering the product warranty by providing customer and purchase details.
Details the 1-year warranty for defects and a 5-year warranty for the compressor.
List of service center addresses and contact details across various cities in the Philippines.
Conditions under which the warranty is void, including improper handling, accidents, and unauthorized repairs.
