To Next PageTo Next PageHow to check power supply for Sanyo Air Conditioner?
To ensure your Sanyo Air Conditioner receives adequate power, first, verify that the voltage falls within the specified range, allowing for a variation of +/–10% of the rating. Second, confirm that the power supply is active and properly delivering power to the unit.
How to check power supply wiring for Sanyo Air Conditioner?
To resolve power supply wiring issues with your Sanyo Air Conditioner, check that the power supply wires are correctly connected to terminals L and N on the terminal plate in the outdoor unit.
How to check lead wires and connectors in Sanyo SAP-K77RAX Air Conditioner?
To troubleshoot lead wires and connectors in your Sanyo Air Conditioner units: * Ensure the coating of lead wires is undamaged. * Confirm lead wires and connectors are firmly connected. * Verify the wiring is correct.
General| Brand | Sanyo |
|---|---|
| Model | SAP-K77RAX |
| Category | Air Conditioner |
| Language | English |
General instructions and warnings for safe operation and installation of the air conditioning system.
Advice for transporting, installing, connecting refrigerant tubing, and servicing the unit safely.
Specific warnings related to wiring, grounding, and potential electrical hazards.
Details key performance, electrical, and physical specifications for each air conditioner model.
Detailed cooling capacity data under various indoor and outdoor temperature conditions.
Shows internal wiring schematics for indoor and outdoor units.
Recommends optimal locations for indoor and outdoor units, considering airflow and environmental factors.
Procedure for verifying correct operation after installation using the remote controller.
Steps to take before diagnosing specific issues, focusing on power and wiring.
Diagnosing issues when the unit fails to start, including breaker trips and short circuits.
Addresses issues like only indoor fan, flap motor, compressor, or outdoor fan not running.
Procedures for checking insulation resistance of power cords, units, and electrical parts.
Instructions for testing continuity of fuses and the condition of motor capacitors.
Covers general safety warnings, specific hazards, and the meaning of alert symbols.
