To Next PageTo Next Page
Need help?Do you have a question about the Sanyo SAP-K71GJHA and is the answer not in the manual?
General| Brand | Sanyo |
|---|---|
| Model | SAP-K71GJHA |
| Category | Air Conditioner |
| Language | English |
Detailed specifications for indoor and outdoor units, including capacity and electrical ratings.
Specifications for key internal components like PCB, motors, and coils.
Specifications for transformers, thermistors, relays, and valves.
Guidelines for insulating refrigerant tubing to prevent condensation and heat loss.
Graphs showing operating current and pressure vs. temperature.
Charts illustrating air throw distance based on flap angle and velocity.
Tables detailing cooling capacity based on indoor/outdoor temperatures.
Graph showing heating capacity ratio vs. outdoor temperature.
Electrical ratings for cooling and heating, including amps and power input.
Wiring schematics for indoor and outdoor units, including component connections.
Guidelines for choosing optimal locations for indoor and outdoor units.
Recommendations for placing the remote control for optimal operation.
Guidance on selecting appropriate wiring for power supply systems.
How the system maintains room temperature via compressor cycling.
How the unit removes moisture from the air.
System's ability to switch modes based on room temperature.
Function to prevent the indoor heat exchange coil from freezing.
Prevents overheating of the indoor heat exchange coil.
Controls indoor fan speed until the heat exchanger warms up.
Process to remove frost from outdoor coil during heating.
Automatic adjustment of outdoor fan speed based on temperature.
Initial checks for power supply and wiring before diagnosing issues.
Troubleshooting steps when the unit does not power on or circuit breaker trips.
Troubleshooting specific component failures like indoor fan or flap motor.
Addressing issues like mode switching failure or poor performance.
Identifying and resolving issues caused by faulty thermistors.
Procedures for checking insulation resistance of wires and components.
How to test a fuse for continuity using a multimeter.
Method for testing motor capacitors for proper function.
How to assign unique addresses for multiple indoor units.
