To Next PageTo Next Page
Need help?Do you have a question about the Sanyo SAP-K71GH and is the answer not in the manual?
General| Brand | Sanyo |
|---|---|
| Model | SAP-K71GH |
| Category | Air Conditioner |
| Language | English |
Details for Indoor and Outdoor unit specifications like capacity, electrical rating, dimensions, and weight.
Specifications for major components like controller PCB, fan motor, flap motor, and heat exchanger coil.
Specifications for other components such as transformers, thermistors, relays, and valves.
Charts showing operating current and pressure versus temperature for cooling and heating modes.
Charts illustrating air throw distance based on flap angle and air velocity for different modes.
Tables detailing cooling capacity based on indoor and outdoor temperature conditions.
Chart showing heating capacity ratio versus outdoor temperature.
Tables detailing running amperes and power input for cooling and heating under various conditions.
Wiring diagrams for indoor and outdoor units, essential for installation and repair.
Guidelines for choosing suitable locations for indoor and outdoor units, including warnings.
Recommendations for installing the remote control unit to ensure proper operation.
Guidance on appropriate wire specifications and lengths for power supply connections.
Explanation of how the unit maintains room temperature through compressor cycling.
Details on how the unit performs dehumidification without significant temperature reduction.
Function to prevent the indoor heat exchange coil from freezing during cooling operation.
Mechanism to prevent overheating of the indoor heat exchange coil during heating.
Function to control indoor fan speed to prevent cold drafts during heating warm-up.
Description of the defrosting cycle for heating operation, including a flowchart.
Preliminary checks for power supply, inter-unit wiring, and lead wires before diagnosing issues.
Troubleshooting steps for when the circuit breaker trips or the unit fails to start.
Diagnosing issues when only specific components like fans or the compressor are not functioning.
Troubleshooting steps for observed issues like incorrect mode switching or poor performance.
Procedures for diagnosing and resolving issues related to defective indoor coil or room temperature sensors.
Procedure for measuring insulation resistance of power supply wires and unit components for safety.
Method for checking the continuity of fuses on the PCB assembly using a multimeter.
Procedure for checking the condition of motor capacitors using a multimeter.
