To Next PageTo Next Page
Need help?Do you have a question about the Sanyo SAP-K181AA and is the answer not in the manual?
General| Power Supply | 220-240V, 50Hz |
|---|---|
| Power Consumption (Cooling) | 1.8 kW |
| Type | Split |
| Cooling Capacity | 18000 BTU/hr |
| Dimensions (Outdoor Unit) | 780 x 540 x 250 mm |
Essential safety guidelines for installation, transport, and servicing.
Detailed technical parameters for indoor and outdoor units.
Specific details and models of key internal components like motors and PCBs.
Specifications for transformers, sensors, relays, and thermostats.
Detailed measurements and diagrams for the indoor unit.
Detailed measurements and diagrams for the outdoor unit.
Guidelines and importance of insulating refrigerant tubing for performance.
Graphs detailing cooling characteristics and operating parameters.
Charts illustrating airflow distance based on flap angle settings.
Tables detailing cooling capacity under various temperature conditions.
Key electrical parameters like voltage, current, and power input.
Schematic diagrams for indoor and outdoor unit electrical connections.
Guidance on selecting optimal locations for indoor and outdoor units.
Recommended placement for the remote control unit for optimal function.
Guidelines for selecting appropriate power supply wire length and size.
Explanation of the unit's room temperature control mechanism.
Details on the dehumidifying mode of operation and its cycles.
How the unit prevents freezing of the indoor heat exchanger coil.
Automatic adjustment of outdoor fan speed based on ambient temperature.
Essential safety checks and preliminary troubleshooting steps.
Steps to diagnose and resolve complete unit non-operation issues.
Troubleshooting specific component failures like fan or compressor not running.
Diagnosing issues like poor cooling or excessive cooling during operation.
Identifying and addressing issues related to defective temperature sensors.
Procedures for testing insulation resistance for electrical safety.
Method for checking the continuity of fuses on the PCB assembly.
Method for testing the functionality of motor capacitors.
Procedure to assign unique addresses to multiple indoor units.
Explanation of warning and caution symbols used in the manual.
Mandatory electrical codes and grounding requirements for installation.
General safety precautions for using and installing the air conditioner.
Step-by-step guide to operating the air conditioner via remote control.
How to manually or automatically adjust the fan speed.
Energy-saving mode that adjusts temperature automatically for comfort.
Instructions for cleaning the indoor and outdoor unit components.
