To Next PageTo Next PageWhat to do if my Sanyo Air Conditioner has power supply issues?
If you're experiencing power supply issues with your Sanyo Air Conditioner, verify that the voltage is within the specified range (±10% of the rating). Also, check to ensure that power is actually being supplied to the unit.
How to check lead wires and connectors in Sanyo SAP–K303A Air Conditioner?
To check the lead wires and connectors in your Sanyo Air Conditioner's indoor and outdoor units: * Ensure the coating of the lead wires isn't damaged. * Confirm the lead wires and connectors are firmly connected. * Verify that the wiring is correct.
How to check power supply wiring on a Sanyo SAP–K303A?
To check the power supply wiring on your Sanyo Air Conditioner, make sure that the power supply wires are correctly connected to terminals No.1 and No.2 on the 3P terminal plate in the outdoor unit.
What to do if Sanyo SAP–K303A Air Conditioner inter-unit wiring is not working?
If your Sanyo Air Conditioner inter-unit wiring is not working, check that the inter-unit wiring is correctly connected to the indoor unit from the outdoor unit.
General| Power Source | 220-240V, 50Hz |
|---|---|
| Indoor Unit Weight | 9 kg |
| Refrigerant | R410A |
| Type | Split System |
| Outdoor Unit Dimensions (W x H x D) | 780 x 540 x 259 mm |
| Operating Temperature Range (Cooling) | 18°C to 43°C |
Key safety instructions and hazard warnings for installation and servicing.
Guidelines for safely lifting and moving air conditioning units to prevent injury.
Advice on proper installation locations and support for indoor and outdoor units.
Instructions for safely connecting refrigerant tubing using the flare method.
Safety measures to follow before and during unit servicing to prevent electrical shock and injury.
Precautions regarding refrigerant gas exposure and ventilation during operation.
Wiring diagrams for indoor and outdoor units, detailing component connections and safety.
Guidelines for choosing optimal locations for indoor and outdoor units, considering airflow and clearances.
Guidance on selecting appropriate wire sizes and lengths for power supply and control lines.
Initial checks and safety warnings before proceeding with troubleshooting procedures.
Diagnostic steps when the air conditioner fails to operate, covering power and breaker issues.
Diagnosing and resolving abnormal operation issues like poor or excessive cooling.
