Sanyo VCC-4594P - Page 2

Scanning system : PAL standard (625 TV lines, 25 frames/sec.)
Interlace : PLL 2:1 interlace
Image device : 1/3 inch solid state image device CCD
Picture elements : 795 (Horizontal) x 596 (Vertical)
Effective picture elements : 752 (Horizontal) x 582 (Vertical)
Synchronizing system : Internal sync, External sync, Line lock (VCC-4594P only)
Resolution : 520 TV lines horizontally, 400 TV lines vertically
Video output level : 1.0 Vp-p/75 Ω, composite
Video S/N ratio : More than 48 dB
Minimum required illumination : Approx. 0.03 lux with a F 1.2 lens (B/W mode),
(incandescent lighting) Approx. 0.6 lux with a F1.2 lens (colour mode)
Control terminal : Manual colour/black and white setting
Backlight compensation : Manual MULT/CENT switching
(Active when using an auto-iris lens)
Iris function : Manual EI/AI switching
Electronic iris range : 0.6 lux to 35,000 lux (F1.2, lens: colour mode)
1.0 lux to 50,000 lux (F1.4, lens: colour mode)
Electric shutter : 8 speeds, selectable by switches: (1/50, 1/120, 1/250, 1/500,
1/1000, 1/2000, 1/4000, 1/10000 sec.)
Flange-back : 12.5 mm ± 0.5 mm
White balance : ATW/Manual switching
Lens mount : CS mount
Environmental conditions : Temperature: -10 °C ~ + 50 °C
Humidity: less than 90 % (no condensation)
Power supply : 24 V AC, 50 Hz (VCC-4594P)
12 V DC (VCC-4592P)
Power consumption : VCC-4594P : 4.1 W (with auto iris lens)
3.2 W (without auto iris lens)
VCC-4592P : 3.3 W (with auto iris lens)
2.6 W (without auto iris lens)
Weight : Approx. 450 g (without lens)
Dimensions : 67 (W) mm x 54 (H) mm x 136 (D) mm
SERVICE MANUAL
COLOUR CCD Camera
VCC-4592P
(Product Code : 117 109 14)
(South East Asia)
(Europe)
FILE NO.
REFERENCE No. SM5310275
L53Z2/XE, L53Z4/XE
NOTE : 1. Parts order must contain model number, part number, and description.
2. Substitute parts may be supplied as the service parts.
3. N. S. P. : Not available as service parts.
Design and specification are subject to change without notice.
The components designated by a symbol ( ! ) in this schematic diagram designates components whose value are of
special significance to product safety. Should any component designated by a symbol need to be replaced, use only the
part designated in the Parts List. Do not deviate from the resistance, wattage, and voltage ratings shown.
PRODUCT SAFETY NOTICE
CONTENTS
1. DISASSEMBLY ....................................2
2. BOARD LOCATION .............................3
3. ADJUSTMENT .....................................4
4. PARTS LIST .........................................8
SCHEMATIC DIAGRAM
SPECIFICATIONS
VCC-4594P
(Product Code : 117 109 04)
(South East Asia)
(Europe)