Sanyo VCC-6574 - Specifications; Camera Specifications; Power and Consumption

SPECIFICATIONS
Camera:
Scanning system : NTSC standard TV system (525 TV
lines, 30 frames/sec.)
Interlace : PLL 2:1 interlace
Image device : 1/3 inch solid state image device
CCD
Picture elements : 811 (H) x 508 (V)
Effective picture elements : 768 (H) x 494 (V)
Synchronizing system : Internal sync, Line lock manually
switchable
Resolution : 520 TV lines horizontally, 350 TV
lines vertically
Video output level : 1.0 Vp-p/75 ohms, composite
Video S/N ratio : More than 48 dB
Minimum required
illumination
(incandescent lighting)
: Approx. 1.4 lux with a F 1.2 lens
Backlight compensation : Manual ON/OFF switching,
MULT/CENT switching (Active when
using an auto-iris lens)
Iris function : Manual EI/AI switching
Electronic iris range : 1.4 lux to 70,000 lux (F 1.2 lens)
Flange-back : 12.5 mm ± 0.5 mm
White balance : ATW/Manual switching
Lens mount : CS mount (or C mount with the
supplied adaptor)
Environmental conditions : Temperature: –10˚C ~ +50˚C
Humidity: less than 90% (no
condensation)
Power supply : 24 V AC, 60 Hz
Power consumption : Approx. 3.7 W (with AI, lens)
Approx. 2.9 W (without AI, lens)
Weight : Approx. 310 g (without lens)
SERVICE
This camera is a precision instruments and if treated with care, will
provide years of satisfactory performance. However, in the event of a
problem, the owner is advised not to attempt to make repairs or open
the cabinet. Servicing should always be referred to your dealer or
Sanyo Authorized Service Centre.
L53X4/US GB 2000, 10, 13
16 English