You can restore all the settings you have configured to the factory default settings.
In [NETWORK SETTINGS], select whether or not to restore the settings including the network
settings and click SET .
WITH: Includes the network settings.
WITHOUT: Excludes the network settings.
An operation confirmation dialog box opens.
You can save the settings you have configured using the backup function.
In [MENU BACKUP], click SET . Then, select SAVE in a save confirmation dialog box and
specify the backup destination file.
All the settings on the NETWORK SETTINGS screen and the [DATE/TIME] setting on the CLOCK
SETTINGS screen are not saved.
You can restore the saved configuration settings of the camera from a backup file.
1 In [COPY RECORDING AREA SETTINGS], select whether or not to restore the settings
including the recording area settings.
WITH: Includes the [AREA] settings configured on the SD/HDD screen.
WITHOUT: Excludes the [AREA] settings configured on the SD/HDD screen.
2 Click BROWSE , select the backup file you want to upload, and click SET .
The backup file is uploaded to the camera to restore the saved configuration settings.
When the upload process is completed, the camera system reboots.
All the settings on the NETWORK SETTINGS screen and the [DATE/TIME] setting on the CLOCK
SETTINGS screen are not restored.
Under [LOG], you can view the access and system logs.
You can click OUTPUT to output the content of each log into a text file.
Logged information will be cleared when you turn off the camera. Save the logs to an SD memory
card, if necessary.
Workin
To Next Page
Loading...
