How to remove the SD card
Push the SD card a bit further into the slot to eject it.
Use the optional hard disk case (VA-HDC4000) to install the SANYO-specified 2.5" SATA hard disk drive and
connect the drive to the EX-HDD terminal.
For detailed information on the hard disk case including hard disk installation, refer to the instruction manual
supplied with the hard disk case.
1 Use the / button to select [SD/HDD SET] on the menu screen, and press the SET
button.
The total capacity of the installed media and their format statuses appear.
1 Medium Type
SD: SD memory card
EX-HDD: External hard disk
Introductio
To Next Page
Loading...
