5 Connect necessary external devices to the alarm input/output terminals.
ALARM IN1/2 terminal: Connect an external switch, infrared sensor, or other device to detect alarm
conditions such as entry of an intruder.
ALARM OUT 1/2: Connect a buzzer, lamp, or other alarm device to output a signal to warn people of the
occurrence of an alarm condition.
6 Install the recording medium.
After installation, the medium requires to be formatted.
1 SD memory card: Insert it into the SD card slot.
2 External hard disk: Connect the drive to the EX-HDD terminal.
7 Turn on the camera.
The power indicator lights up and live video appears on the monitor.
8 Access the camera from your PC's Web browser.
Live video appears on the live screen. Now, you can perform all network operations from your PC.
Quick O
To Next Page
Loading...
