Setting Item Default Setting Optional Setting
MOTION (Use of built-in
motion sensor)
OFF (Disables alarm
detection.)
A MASKING
B DETECT
C ANALYTICS
DURATION (Alarm retention
duration)
5SEC (Ex.: Records alarm
video for 5 sec.)
10SEC to 5MIN, CC (Retains an alarm state as long as
the motion alarm persists.)
A Disabling motion detection in masked areas
B Detecting motion in specific areas
C Detecting motion with lines and areas drawn on the screen
In [MOTION], after selecting a motion sensor type, click DETAIL to configure the detection conditions on the
detailed configuration screen.
You can configure the camera to “automatically output alarm signals” or “remotely (manually) output alarm
signals”.
You can configure the camera to automatically output an alarm signal when either of its alarm input terminals
receives an alarm signal.
Quick O
To Next Page
Loading...
