Setting Item Default Setting Required Setting
1 RECORD STREAM OFF Select the desired stream (STREAM1 to
STREAM4).
2 AUDIO OFF ON (Records video and sound simultaneously)
3 ALTERATION
DETECTION
OFF ON (Detects tampered images)
4 ALARM EVENT1 OFF ON
You can configure three patterns of recording
conditions (for ALARM EVENT1 to 3).
5 TRIGGER (Recording
trigger conditions)
ALARM IN1 (Triggers recording when
ALARM IN1 terminal receives an alarm
signal.)
ALARM IN2, MOTION, ALARM OUT1/2,
NETWORK FAILURE
6 PRE ALARM OFF ON (Records video for a specific period before
alarm occurrence.)
7 REC BUTTON OFF ON (Records video using the emergency
recording button on the live screen control
panel)
When finished configuring the above basic recording settings, configure the recording schedule as required.
3 On the RECORDING screen, click SCHEDULE .
Setting Item Default Setting Required Setting
1 SCHEDULE OFF ON (Enables recording schedule configuration.)
2 SUN to SAT (START/END) 00:00/00:00 Configure the start/end time of recording for each day of the week.
(Ex.: 08:00/20:00)
3 DAILY 00:00/00:00 Select this check box to set the same start/end time for every day.
Quick O
To Next Page
Loading...
