1 Select a clipping rectangle in the image display area of the controller by clicking.
The clipped area of the subject appears in the image display area of the live screen.
2 In the image display area of the controller, drag the clipping rectangle in the direction
you want to pan/tilt.
The clipped area moves in the corresponding direction.
You may use the zoom function in conjunction with the manual panning/tilting function.
Click CLIENT SETTINGS on the control panel to display the CLIENT SETTINGS screen.
On this screen, you can perform the following operations:
A Configuring the video stream displayed on the live screen
B Configuring the audio
C Changing your password
Some administrator configuration screen settings may limit the operations you can perform on this
screen.
Shows the name of the user currently accessing the camera.
Workin
To Next Page
Loading...
