1 Select the check box next to the stream for which you want to change data and click
CHANGE .
The stream registration screen for the selected stream appears in a separate window.
2 Change the desired settings and click SET .
Your changes are saved and reflected in the stream list.
3 Click SET in the stream list.
The camera restarts, and the changed settings are applied.
1 Select the check box next to the stream you want to delete and click DELETE .
The selected stream is deleted from the stream list.
2 Click SET in the stream list.
The camera restarts, and the stream you selected has been deleted.
Configure the conditions of the audio you receive from the camera.
Workin
To Next Page
Loading...
