button.
The IRIS SETTING screen appears.
Use the / button to select [EI] and use the / button to choose “ON”.
The electronic iris is now enabled, controlling both the AGC circuit and the shutter speed to adjust the exposure.
Use the / button to select [IRIS STOP] and use the / button to adjust the iris stop.
The lens iris changes based on the iris stop setting.
Available settings: 1 (closes the iris = dark) to 17 (opens the iris = bright)
Use the / button to select [LEVEL] and use the / button to adjust the level of the video
signal level.
Available settings: 0 (dark) to 100 (bright)
Select [MENU] and choose “BACK” or “END” to complete adjustment.
2
Setting the electronic iris (EI) causes the following:
The [SHUTTER] (electronic shutter) setting (“SHORT” or “LONG”) will be cancelled and the
[SENSE UP] (electronic sensitivity boosting) will not work.
Under extremely bright lighting, the electronic iris cannot adjust the light entering through the lens,
resulting in a phenomenon such as a smear. This may be prevented by changing the lighting angle
or other measures.
Under fluorescent lighting, the camera may cause the target images to flicker. To prevent this,
replace the fluorescent lamps with incandescent lamps.
3
4
5
18 / 100
To Next Page
Loading...
