Sanyo VCC-XZ600P - SHUTTER setting

Sets the electronic shutter.
If you do not use the electronic shutter, set [SHUTTER] to “OFF”.
SHORT: Fast shutter speeds
LONG: Slow shutter speeds
For fast-moving objects, setting a faster shutter speed will reproduce clearer images with less blurs.
Use the / button to select [SHUTTER], use the / button to choose “SHORT”, and press
the SET button.
The ES SETTING screen appears.
Use the / button to select the desired shutter speed.
Available settings:
Select [MENU] and choose “BACK” or “END” to complete the setting.
Increasing the exposure time will improve the sensitivity, ensuring clear images even if the target objects are
dark.
Use the / button to select [SHUTTER], use the / button to choose “LONG”, and press
the SET button.
The ES SETTING screen appears.
If fast shutter speeds (SHORT) cannot be set:
[SENSE UP] (electronic sensitivity boosting) or [EI] (electronic iris) is set.
1
2
PAL: 50, 120, 250, 500, 1000, 2000, 4000, 10000
NTSC: 60, 100, 250, 500, 1000, 2000, 4000, 10000
3
If slow shutter speeds (LONG) cannot be set:
[SENSE UP] (electronic sensitivity boosting) or [EI] (electronic iris) is set.
[MOTION] is set to “ON”.
Setting a slow shutter speed causes the following:
The [V-RESO.UP] (vertical resolution increase) settings will be cancelled.
1
27 / 100