Use this setting to emphasize the profile of the target objects. The aperture adjustment can be done in the
horizontal and vertical directions.
If you do not use the aperture compensation function, set [APERTURE] to “OFF”.
Use the / button to select [APERTURE], use the / button to choose “ON”, and press the
SET button.
The APERTURE SETTING screen appears.
Use the / button to select the direction of aperture compensation (H or V) and use the /
button to set the compensation value.
Available settings:
Select [MENU] and choose “BACK” or “END” to complete the setting.
1
2
H: Horizontal aperture compensation (1 to 15)
V: Vertical aperture compensation (1 to 15)
3
29 / 100
To Next Page
Loading...
