Use this setting to set the gamma correction level to adjust the contrast or brightness level.
Use the / button to select [GAMMA] and use the / button to choose the desired gamma
correction level.
Available settings:
Select [MENU] and choose “BACK” or “END” to complete the setting.
1
0.45: Sets the gamma correction level to 0.45.
1: Sets the gamma correction level to 1.
MODE1: Increases the contrast in dark areas.
MODE2: Increases the contrast in dark areas further.
Choosing “MODE1” or “MODE2” may result in excessively bright images depending on the target
objects.
2
32 / 100
To Next Page
Loading...
